| Machine Taps HSSE-V (3%V) | |||
 |
STEELS WITH GOOD MACHINABILITY Rm < 750 N/mm2. | ||
| DIN 371 | DIN 376-374-5156 | THROUGH AND BLIND HOLES | |
| 104A | 104 |  |
Spiral pointed tap with straight flutes, driving the chips ahead. 5 thread chamfer lead (DIN-Form B). Rake angle 12º-14º measured in the 3rd thread. L104A / L104: Overall length twice DIN length |
| T104A | T104 | ||
| C104A | C104 | ||
| N104A | N104 | ||
| L104A | L104 | ||
| 150A |  |
Spiral
pointed fluteless tap, driving the chips ahead. 5 thread chamfer lead (DIN-Form B). Rake angle 15º-17º measured in the 3rd thread. For holes with thin walls, sheets, etc. Surface treatment: nitrided. |
|
| 151A |  |
Spiral
pointed tap with coolant grooves, driving the chips ahead. 5 thread chamfer lead (DIN-Form B). Rake angle 15º-17º measured in the 3rd thread. Surface treatment: nitrided. |
|
| 109A | 109 |  |
12º
left hand spiral fluted tap, driving the chips ahead. 5 thread chamfer lead (DIN-Form D). Rake angle 12º-14º. |
| 105A | 105 |  |
Straight
fluted tap. 2,5 thread chamfer lead (DIN-Form C). Rake angle 12º-14 |
| 135A | 135 |  |
Straight
fluted tap. Interrupted thread. 2,5 thread chamfer lead (DIN-Form C). Rake angle 12º-14º. |
| 110A | 110 |  |
15°
right hand spiral fluted tap. 3,5 thread chamfer lead (DIN-Form D). Rake angle 12º-14º. |
| 112A | 112 |  |
38º right hand spiral fluted tap, increased flute
length. Threaded length: 10 threads. Starting from the 5th thread, back tapered thread portion to reduce friction and improve swarf clearance. 2,5 thread chamfer lead (DIN-Form C). Rake angle 12º-14º. L112A / L112: Overall length twice DIN length |
| T112A | T112 | ||
| C112A | C112 | ||
| N112A | N112 | ||
| L112A | L112 | ||
REMEMBER FERG manufactures, under request, others threading taps and dies designs for special threading applications. Don't doubt to consult with our technical department. |
