| Machine Taps HSSE-V (3%V) | |||
 |
ANY MATERIAL WITH AT LEAST 8-10% ELONGATION | ||
| DIN 371 | DIN 376-374-5156 | THROUGH AND BLIND HOLES | |
| 171A | 171 |  |
Cold forming tap, with oil
grooves. 3 thread chamfer lead (DIN-Form C). For through and blind holes in materials < 600 N/mm2 and with an elongation coefficient of at least 12%. |
| T171A | T171 | ||
| A171A | A171 | ||
| H171A | H171 | ||
| 173A | 173 |  |
Cold forming tap. 3 thread chamfer lead (DIN-Form C). For through and blind holes in materials < 600 N/mm2 and with an elongation coefficient of at least 12%. |
| T173A | T173 | ||
| A173A | A173 | ||
| H173A | H173 | ||
REMEMBER FERG manufactures, under request, others threading taps and dies designs for special threading applications. Don't doubt to consult with our technical department. |
