| Machine Taps HSSE-V (3%V) | |||
 |
HEAT TREATED AND HEAT-RESISTANT STEELS Rm < 1000 N/mm2. | ||
| DIN 371 | DIN 376-374-5156 | THROUGH HOLES | |
| 184A | 184 |  |
Spiral pointed tap with
straight flutes, driving the chips ahead. 5 thread chamfer lead (DIN-Form B). Rake angle 8º-10º measured int the 3rd thread. |
| T184A | T184 | ||
| A184A | A184 | ||
| 684A | 684 |  |
TAP WITH INTERNAL COOLANT FEED Spiral pointed tap with straight flutes, driving the chips ahead. |
| T684A | T684 | ||
| A684A | A684 | ||
| DIN 371 | DIN 376-374-5156 | BLIND HOLES | |
| 182A | 182 |  |
38º right hand spiral fluted tap, increased flute length. Threaded length: 10 threads. Starting from the 5th thread, back tapered thread portion to reduce friction and improve swarf clearance. 2,5 thread chamfer lead (DIN-Form C). Rake angle 8º-10º. |
| T182A | T182 | ||
| A182A | A182 | ||
| 682A | 682 |  |
TAP WITH INTERNAL COOLANT FEED 38º right hand spiral fluted tap, increased flute length. |
| T682A | T682 | ||
| A682A | A682 | ||
REMEMBER FERG manufactures, under request, others threading taps and dies designs for special threading applications. Don't doubt to consult with our technical department. |
